TICAM1 Industrial Infrared Thermal Imaging Camera with 200MP Visible Light Lens Thermometer Temperature Detect Floor Heating
520
Direct purchase from the factory 
Zajamčena sigurna naplata
Besplatan dar
Pravila dostave
Pravila povrataBesplatan dar
Dobrodošli u Roymall, vašu profesionalnu web stranicu za kupnju vrhunskih darova iz robnih kuća. Visoko cijenimo i cijenimo vašu podršku i želimo vam zahvaliti dodajući dodatnu dozu uzbuđenja vašim kupnjama. Kada kupujete kod nas, ne samo da ćete uživati u visokokvalitetnim proizvodima koji poboljšavaju vaš životni stil, već ćete također dobiti ekskluzivni besplatni dar uz svaku narudžbu koju izvršite. Spremni istražiti našu kolekciju i pronaći savršene darove? Pregledajte naš izbor vrhunskih artikala iz robnih kuća, izvršite narudžbu i radujte se uzbuđenju kada vaš besplatni dar stigne zajedno s vašom kupnjom.Pravila dostave
Trudit ćemo se dostaviti artikle nakon što primimo vaše narudžbe i osigurati da stignu sigurno. Detalji o dostavi bit će navedeni u vašoj potvrdnoj e-pošti.U većini slučajeva narudžbe se obrađuju u roku od 2 dana.U posebnim okolnostima, bit će odgođeno kako slijedi: Kada naručite subotom, nedjeljom ili praznicima, bit će odgođeno za 2 dana..Obično je potrebno 5-7 radnih dana (od ponedjeljka do petka) bez utjecaja kašnjenja leta ili drugih okolišnih čimbenika..Budući da je naša usluga dostave širom svijeta, vrijeme dostave ovisit će o vašoj lokaciji, pa možda trebate malo pričekati ako se nalazite u udaljenim područjima ili zemljama.1. Pravila povrata i zamjene
Prihvaćamo samo artikle kupljene s roymall.com. Ako kupujete od naših lokalnih distributera ili drugih trgovaca, ne možete ih vratiti na našoj strani. Artikli na kraju prodaje ili besplatni darovi nisu prihvatljivi za povrat.Da biste ispunili uvjete za povrat, vaš artikl mora biti neiskorišten i u istom stanju u kojem ste ga primili. Također mora biti u originalnom pakiranju.Nakon što od nas primite upute za povrat, pakirajte svoje vraćene artikle i ostavite paket u lokalnoj pošti ili drugom kuriru.Obradit ćemo vaš povrat ili zamjenu artikla unutar 3-5 radnih dana nakon što ga primimo. Povrat novca bit će obrađen i automatski vraćen na vaš izvorni način plaćanja.Ne mogu se prihvatiti povrati ili zamjene ako je proizvod prilagođen, uključujući prilagođenu veličinu, boju ili ispis.Treba li vam dodatna pomoć, kontaktirajte nas. service@roymall.com ili Whatsapp: +8619359849471
2.Pravila povrata novca
Dobit ćete potpuni povrat novca ili 100% kredita u trgovini nakon što primimo vraćeni paket i provjerimo ga. Povrat novca bit će obrađen i automatski vraćen na vaš izvorni način plaćanja.Imajte na umu da troškovi dostave i bilo kakve carine ili naknade nisu povratni. Dodatni troškovi dostave ne podliježu povratu nakon što je paket poslan. Odgovorni ste za plaćanje tih naknada i ne možemo ih odbiti ili vratiti, čak i ako se narudžba vrati nama. Nakon što primimo i potvrdimo vaš vraćeni artikl, poslat ćemo vam e-poštu kako bismo vas obavijestili da smo primili vaš vraćeni artikl. Također ćemo vas obavijestiti o odobrenju ili odbijanju vašeg povrata novca.Ako imate bilo kakvih problema u vezi s procesom povrata novca, kontaktirajte nas. service@roymall.com ili Whatsapp: +8619359849471
Features:
1. Build in a visible light camera with 200MP pixels. In Infrared refer/merger modes, the resolution used is 320x240.
When using the WIFI function to connect to the computer and view the screen on the computer, users can choose different resolutions from the menu, with a maximum support of 200MP. At this time, this device even can be used as a security monitoring camera.
2. Support the Dual Light (thermal imaging and visible light) Fusion Mode to clearly capture each hotspot.(Merger mode)
3. Built in bright LED light, long press the wheel to turn on the flashlight;
4. Support four display modes: Infrared only, camera only, Infrared refer, and Merger;
5. Supports 5 color palettes, Iron oxide red, Rainbow, White Heat, Blue Orange, and Blue Yellow modes;
6. Emissivity can be adjusted to meet the temperature measurement of different materials;
7. Support image shooting, local storage, browsing, and viewing through a data cable connected to a computer;
8. In Merger mode, the positions of thermal imaging images and visible light images can be corrected;
9. Support WIFI AP network distribution function, connect to computers or mobile phone through WiFi network, and view local images through computers/mobile devices;
10. You can also view real-time video images through WiFi to achieve real-time monitoring;
11. Support firmware upgrades;
12. Other professional functions: filtering order settings, image display algorithm settings, etc.
13. Equipped with a built-in 1200mAH battery, it can be used for more than 4 hours when the screen is constantly on. If accessed through the network, the screen will automatically shut down to save power
14. 2.4-inch TFT high-definition display screen with a resolution of 320x240
15. Automatically capture the highest and lowest temperatures, as well as the center temperature.
Advantageuff1a
TICAM1 is a dual lens thermal imager with thermal imaging sensors and visible light cameras.
Supports 4 display modes: only infrared, only camera, camera refer, and merger mode(fusion mode);
Supports 6 color palettes; Supports image saving and USB flash drive functionality.
Supports WiFi connection, allowing users to browse infrared and visible light camera videos and save screenshots within the local area network through a web browser.
The fusion mode is also called Dual Light (thermal imaging and visible light) Fusion mode. In this mode, the hot spots can be clearly seen.
The thermal imaging camera can be widely used in equipment maintenance, floor heating maintenance and other occasions.
Specification:
Net weight: 75g
Volume: 75 x 51 x 27mm
Infrared resolution: 32 x 32
Infrared FOV: 33 u00b0 x 33 u00b0
Visible light lens: 200MP, supports up to UXGA (1632x1232)
Interface: Type-C
Storage capacity: 1.5M Byte, capable of storing over 50 JPEG format screenshots
Maximum frame count: 5.3FPS
Number of color palettes: 5 types
Temperature measurement accuracy: u00b1 3 u2103
Temperature measurement range: -20~1000 u2103
Working temperature: 15-45 u2103
Storage temperature: 0-60 u2103
Package included:
1 x Thermal imaging camera
1. Build in a visible light camera with 200MP pixels. In Infrared refer/merger modes, the resolution used is 320x240.
When using the WIFI function to connect to the computer and view the screen on the computer, users can choose different resolutions from the menu, with a maximum support of 200MP. At this time, this device even can be used as a security monitoring camera.
2. Support the Dual Light (thermal imaging and visible light) Fusion Mode to clearly capture each hotspot.(Merger mode)
3. Built in bright LED light, long press the wheel to turn on the flashlight;
4. Support four display modes: Infrared only, camera only, Infrared refer, and Merger;
5. Supports 5 color palettes, Iron oxide red, Rainbow, White Heat, Blue Orange, and Blue Yellow modes;
6. Emissivity can be adjusted to meet the temperature measurement of different materials;
7. Support image shooting, local storage, browsing, and viewing through a data cable connected to a computer;
8. In Merger mode, the positions of thermal imaging images and visible light images can be corrected;
9. Support WIFI AP network distribution function, connect to computers or mobile phone through WiFi network, and view local images through computers/mobile devices;
10. You can also view real-time video images through WiFi to achieve real-time monitoring;
11. Support firmware upgrades;
12. Other professional functions: filtering order settings, image display algorithm settings, etc.
13. Equipped with a built-in 1200mAH battery, it can be used for more than 4 hours when the screen is constantly on. If accessed through the network, the screen will automatically shut down to save power
14. 2.4-inch TFT high-definition display screen with a resolution of 320x240
15. Automatically capture the highest and lowest temperatures, as well as the center temperature.
Advantageuff1a
TICAM1 is a dual lens thermal imager with thermal imaging sensors and visible light cameras.
Supports 4 display modes: only infrared, only camera, camera refer, and merger mode(fusion mode);
Supports 6 color palettes; Supports image saving and USB flash drive functionality.
Supports WiFi connection, allowing users to browse infrared and visible light camera videos and save screenshots within the local area network through a web browser.
The fusion mode is also called Dual Light (thermal imaging and visible light) Fusion mode. In this mode, the hot spots can be clearly seen.
The thermal imaging camera can be widely used in equipment maintenance, floor heating maintenance and other occasions.
Specification:
Net weight: 75g
Volume: 75 x 51 x 27mm
Infrared resolution: 32 x 32
Infrared FOV: 33 u00b0 x 33 u00b0
Visible light lens: 200MP, supports up to UXGA (1632x1232)
Interface: Type-C
Storage capacity: 1.5M Byte, capable of storing over 50 JPEG format screenshots
Maximum frame count: 5.3FPS
Number of color palettes: 5 types
Temperature measurement accuracy: u00b1 3 u2103
Temperature measurement range: -20~1000 u2103
Working temperature: 15-45 u2103
Storage temperature: 0-60 u2103
Package included:
1 x Thermal imaging camera
Products related to this item
Loading related products...
❮
❯
Videos for similar product
Loading product videos...
❮
❯
Tools, Industrial & Scientific Ranking
